Epson EQUITY 3865X/20 PLUS User Manual page 113

2. Lift up the subassembly from your work surface and lower
the back end into the
computer into the openings in the top dots on the
subassembly, as shown below.
The subassembly is actually resting on the top tabs.
3. Hold up the subassembly at an angle. Reach under it and
grasp the two main system board power supply cables leading
from the power supply. The cables are labelled P4 and P5.
Accessing Internal Components
5-10
computer, fitting the
tabs
top tabs in the