Epson EQUITY 3865X/20 PLUS User Manual page 42

1. At the main Setup menu, highlight
appears identifying the current display adapter type, such as
the following:
If the display adapter type is correct for your system, you can
skip this section.
2. To change the display adapter setting, press
cursor block moves into the submenu and you see an
additional menu on the right side:
CGA
CGA
Monochrome
EGA,MCGA,VGA or other
Remap VGABIOS at C000
3. Enter
Press
then use T or J to highlight the option that matches your
display adapter type. If you are not sure which one to
choose, follow these guidelines:
installed a VGA, EGA, or MCGA card, select
EGA,MCGA,VGA or other.
mode graphics adapter (MGA) attached to an RGB
(color) monitor, select CGA 80 column. (Also set
the color/mono switch on the MGA card to color.)
VGA
40 column
80
column
80
column
to move the cursor block into this submenu and
Running the Setup Program
Display.
A submenu
Enter.
The
2-7