Table of Contents
Advertisement
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speakers. Be sure
you have made a correct connection to the projector audio input. See
19
for how the audio input is connected.
INPUT SOURCE
Computer
HDMI 1/2
Component
VIDEO
S-VIDEO
Muting the sound
To temporarily turn off the sound,
•
Using the remote control
Press MUTE to temporarily turn off the sound. While the sound is off,
the screen will display
To restore the sound, press MUTE again.
•
Using the OSD menu
1.
Press MENU/EXIT and then press
SETUP: Advanced menu is highlighted.
2.
Press
The Audio Settings page displays.
3.
Highlight Mute and press
4.
To restore the sound, repeat steps 1-3 and press
Adjusting the sound level
To adjust the sound level,
•
Using the remote control
Press
or
•
Using the OSD menu
1.
Repeat steps 1-2 above.
2.
Press
desired sound level.
Turning off the Power on/off ring tone
1.
Repeat steps 1-2 above.
2.
Press
to select Off.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power on/off ring tone.
44
Operation
PC
in the upper right corner of the screen.
to highlight Audio Settings and press ENTER.
/
to select a desired sound level.
to highlight Volume and press
to highlight Power on/off ring tone and press
AUDIO IN
mini jack
HDMI
RCA
RCA
RCA
/
until the SYSTEM
to select On.
/
to select Off.
/
to select a
"Connection" on page
AUDIO OUT
mini jack
mini jack
mini jack
mini jack
mini jack
/
Advertisement
Table of Contents
