Module Id Switch; Scsi Jumper Cables And Terminators - Sun Microsystems Sun StorEdge A3500FC Configuration Manual

3.1.2.2

Module ID Switch

Ensure that the module IDs for the StorEdge D1000 disk arrays are set according to
TABLE 3-2
TABLE 3-2
Disk Array Number
5 (Top)
4
3
2
1 (Bottom)
3.1.2.3

SCSI Jumper Cables and Terminators

All Sun StorEdge D1000 disk arrays in this configuration should have SCSI jumper
cables between the middle SCSI connectors (IN/OUT-1 and IN/OUT-2) and a
differential SCSI terminator in the far right SCSI connector (IN/OUT-2). This
configuration is shown in
3-6 Sun StorEdge A3500/A3500FC Hardware Configuration Guide • December 1999
.
1x5 Module ID Switch Settings
Module ID Setting
5
4
3
2
1
FIGURE 3-15
.