When There Is A Primary Server At The Dial-Up Destination - Epson C82362 Administrator's Manual

When there is a primary server at the dial-up destination

For local networks with file servers:
File
server
Printer
When the power is turned on
A dial-up is generated because access is made to a local file
server first and then to a primary server. This is not a problem
since this dial-up only occurs at startup.
When the interface card is not set correctly
A dial-up is generated because access is made to a local file
server first and then to a primary server. This dial-up is
repeated at intervals of approximately 5 minutes. Make the
correct interface card settings to avoid this problem.
During normal operation (standby)
An SPX Watchdog packet is sent according to the NetWare
protocol convention. Use a router with a vicarious response
function to avoid a dial-up.
During normal operation (printing)
A dial-up is generated while the printing data is being
transferred. This is not a problem because it is a dial-up
specific to the dial-up network.
When the primary server is down during operation
3-46
Using the Interface Card with NetWare
Dial-up
router
Local network
Primary file server
(primary print server)
Dial-up
router
Remote network