Using Bindery Print Server (Netware 3.1X/4.1X) - Epson C82362 Administrator's Manual

Using Bindery Print Server (NetWare 3.1x/4.1x)

This section contains instructions on using the interface card in
Print Server mode under NetWare 3.1x/4.1x/IntranetWare with
Bindery emulation.
Configuring the interface card using EpsonNet WinAssist
Configure the interface card using EpsonNet WinAssist.
Note:
The Novell Client32 or Novell IntranetWare Client must be installed in
your computer. Do not use Novell Client for Windows 95/98 version
3.00 or Novell Client for Windows NT version 4.50.
1. Turn on the printer with the interface card installed.
2. From any NetWare client, log in to the target NetWare server
with supervisor privileges. You must log in with bindery
connection.
3. Run EpsonNet WinAssist from the Start menu.
4. Click IPX. Select the printer you want to configure from the
list, then click Configuration.
Using the Interface Card with NetWare
3
3-5