Epson C82362 Administrator's Manual page 43

Whenever the printer is turned on, you need to change the
printer port setting if DHCP is selected for the Get IP address.
For TCP/IP printing, we recommend you select Manual and
set the IP address manually.
7. When setting the IP address using ping command, select
Manual and select the Set by PING check box. This check box
is available only when Manual is selected for Get IP Address.
Be sure to clear the box when not using ping to prevent an
unexpected change of the IP address or when using EpsonNet
WebManager. EpsonNet MacAssist does not have this
function.
8. Assign the IP address, the subnet mask, and the default
gateway. Be sure to give an IP address which does not conflict
with any other device on the network.
Note:
The default value for the IP address, subnet mask, and default
gateway are 192.168.192.168, 255.255.255.0, and
255.255.255.255 respectively.
If there is a server or a router which functions as a gateway,
enter the IP address of the server or router for the gateway
address. If there is no gateway, leave the default values.
9. After making the settings, click OK. The Password dialog box
appears.
Setting the IP Address
2
2-15