Macintosh (with Open Transport)
Follow the steps below to set or check the IP address.
1. Double-click the AppleTalk Control Panel, and check that
Ethernet is selected.
2. Double-click the TCP/IP Control Panel.
3. Set the IP address and other necessary settings.
Macintosh (without Open Transport)
Follow the steps below to set or check the IP address.
1. Double-click the Network Control Panel.
2. Select EtherTalk.
3. Double-click the MacTCP Control Panel, and check whether
an IP address has been set.
4. If the IP address has not been set, click the Details button and
make the necessary settings. Then, set the IP address in the
MacTCP dialog box.
Setting the IP Address
2
2-11