Configuring The Interface Card Using Epsonnet - Epson C82362 Administrator's Manual

Chapter 2
Setting the IP Address
To use the interface card with TCP/IP, you need to assign it an IP
address using EpsonNet WinAssist, EpsonNet MacAssist, or the
arp/ping command.
The IP address should be set in the following cases:
When configuring the interface card using EpsonNet
WebAssist (the utility that is pre-installed in the interface
card)
Remote (LPR on IP) printing from NetWare 5
TCP/IP (via EpsonNet Direct Print) printing from Windows
98, Windows 95, Windows 2000, and Windows NT 4.0
TCP/IP (LPR port) printing from Windows 2000, Windows
NT 4.0, and Windows NT 3.51
TCP/IP (lpr port) printing from OS/2 Warp and UNIX
Internet printing using EpsonNet Internet Print on Windows
98, Windows 95, and Windows NT 4.0
Internet printing from Windows 2000
Managing printers using EpsonNet WebManager via TCP/IP
Setting the IP Address
2
2-1