Remove The Access Panel; Install The Access Panel; Remove The Air Baffle; Install The Air Baffle - HP ProLiant BL280c - G6 Server User Manual

Remove the access panel

To remove the component:
Power down the server blade (on page 13).
1.
Remove the server blade (on page 14).
2.
Press the access panel release button.
3.
Slide the access panel towards the rear of the server blade, and then lift to remove the panel.
4.

Install the access panel

Place the access panel on top of the server blade.
1.
Slide the access panel forward until it clicks into place.
2.

Remove the air baffle

Power down the server blade (on page 13).
1.
Remove the server blade (on page 14).
2.
Remove the access panel (on page 15).
3.
If installed, disconnect the hard drive power and data cables from the system board.
4.
Remove the air baffle.
5.

Install the air baffle

IMPORTANT:
baffle.
To maintain proper airflow and prevent thermal damage, always install the air
Operations 15