Network Install: Hardware - Oki C5300n Install Manual

Network Install: Hardware

®
Note:
No Ethernet cable is supplied with the printer. Use an Ethernet cable with two twisted wire pairs and an RJ45
plug.
□
Turn off the printer.
□
Remove the plug from the Ethernet port (
□
Connect the other end of the cable to the network port.
□
Turn on the printer and wait for the print server's STATUS light (
□
Press the TEST button (
sheets handy: they contain information you need to set up the printer on your network.
1
), then connect your Ethernet cable to the port.
3
) on the print server. The Network Information configuration sheets print. Keep these
2
) to stop blinking.
2