Auto Tray Switch; Paper Size Check; Multi Purpose Tray Is Manual Feed; Run Maintenance Cycle Before Printing - Oki C3200n Reference

Use only recommended transparencies (3M
CG3720, Oki 52205701).

Auto tray switch

If two trays contain identical print media, the printer can
automatically switch to the other tray if the media runs out in
the middle of a print job. If you will be using different media in
the different trays, deselect this.

Paper size check

Deselect this if you do not want the printer to check to see if
the size paper loaded in the selected tray matches that
required for the document being printed.

Multi Purpose Tray is Manual feed

Select this if you wish to feed media (e.g. banner paper) into
the Multi Purpose Tray manually. The printer display will show
a message requesting that you load the media before the job
prints.
The default is No.
Always create 100% Black(K) Toner
Normally the printer uses all four toner cartridges to print black
text. Use this to set the printer to always print black text using
only the black toner cartridge.

Run maintenance cycle before printing

Use this to generate a cleaning page which runs through the
printer before the job is printed. This should eliminate any
fading, streaking or erratic marks from the printed pages.
NOTE
C3200n Technical Reference, Mac
Macintosh OS 10.2 • 30