Craftsman 172.79183 Operator's Manual page 9

unplugged Edger and theEdger has come toa
complete stop.
The Edger's blade will continue to rotate for a few seconds arzer it is switched ozx.
ADDITIONAL RuLEs FOR SAFE OPERATION
t
1. ALWAYS wear safety glasses or eye shleJdswhen using this Edger.
Everydayeyeglasseshave ontyimpact-feslstard lenses; they are NOT safety glasses.
2. PROTECT your lungs. Wear a face mask, dustmask or respirator if the operationis dusty.
3. PROTECT your hearing. Wear appropriatepersonalhearingprotection duringuse.
Under some cond{tions noise fromthisproductmay contributeto headng loss.
4. ALL VJSITORSAND BYSTANDERS MUSTwear the same safety equipmentthat the
operatorof the tootweam.
5. ALWAYSoheck the tool for domag_d parts. Check for misatignment o r bindingof moving
parts, breakage of parts,and any ot[ier conditior_ t hat may affectthe tooJ's operation.Before
furtheruse of the to_[, a guardor ether pa_ that is damaged sheu_ be camfLdty oheokedto
determineif it wiltoperate propedyandperfQrm its i ntePaledfunction. A guard or Other part
that_sdamaged shouldbe propedyrepairedor replacedat a Sears or other qualified
servicedealer,
6.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them
to lnstru=t others who may use this tool lfaomeone borrows thts tool, make sure
they have these instructions also;