Craftsman 172.79183 Operator's Manual page 14

ATTACHING EXTENSION CORD
1.
Insert extensioncordSocketintoEdger's POwerPlug (Fig. 5)+
2. An ExtensionCord Retainer is attached to the Handle to reduce strain on the cord;
To us_ thisfeature, simplydouble the extens!oncord as shown, abouta foot from
the end, and insertit intothe end of the Retainer. Place the loop formed by
doublingthe cordover the Hook (Rg. 6a). Gently tug on the cordto ensure that it
is firm_ situatedin the Retainer (Fig. 6b).
3. Keep extensioncord clear of operator, unit and any obstaclesat all times.
Do not exposethe cord to heat, oil, water, or sharp edges.
Fig. 6a
t4