Maintenance Schedule; General Recommendations; Lubrication Chart; Before Each Use - Craftsman 917.293302 Owner's Manual

MAINTENANCE
SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
# ,.
SERVICE DATES
Check Engine Oit Lever _ 6/
Change Engine Oil t_1,2
i .......................
Oil Pivot Points 6/
Inspect Spark Attester/Muffler !_
Inspect Air Screen
Clean or Replace Air Cleaner Cartridge 6,/2
Clean Engine Cylinder Fins
Replace Spark Plug
I - Change more o_'ten when operating under a heavy load or in high ambient temperatures
2 - Service more often when operating in dirty or dusty condilions
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover
items that have been subjected to opera-
tot abuse or negligence. To receive full
value from the warranty, the operator must
maintain tiller as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your tiller.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check tines and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Checktine operation.
o Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRICA-
TION CHART").
LUBRICATION CHART
* Throttle Control
-%
* Idler Bracket
Wheel Hub
Depth Stake Pin
* Leveling
Shield
Hinges
* SAE 30 OR 5W-30 MOTOR OIL
** REFER TO MAINTENANCE "ENGINE"
SECTION
13