►
Press the green expansion rivet (2) into the hole on the casing.
►
Secure the fan by pressing the green expansion rivet (2) into the casing until the tip of the
expansion rivet is spread again.
►
Close the front panel (see "Closing front panel").
►
Close the casing (see "Closing the casing").
Removing front fan (CELSIUS M)
►
Open the casing (see "Opening the casing").
►
Open the front panel (see "Opening front panel").
►
Detach the green expansion rivet (1).
Make sure that the green expansion rivet (1) is not pulled off the fan.
►
Tilt the fan toward the front in the direction of the arrow (2) and remove it from the casing.
►
Disconnect the fan cable.
►
Pull the fan cable out of the casing.
►
Remove the fan.
►
Close the front panel (see "Closing front panel").
►
Close the casing (see "Closing the casing").
A26361-K990-Z120-1-7619, Edition 6
System upgrades
2
1
41