Fujitsu Siemens Computers CELSIUS M Operating Manual page 63

1
2
2
► Push the board up to its slot (1).
► Press the board into the slot so that it engages.
► If necessary, connect the cables.
► Fold the locking rail (3) closed by pressing the clips (2) through the notches on the casing rear
panel from the outside until they engage.
► If you have removed the cross-piece, install it now (see "Installing the cross-piece").
► Install the fan (see "Installing the side fan").
► Close the casing (see "Closing the casing").
If you have installed or removed a PCI board, please check the relevant PCI slot settings in
i
the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
board documentation.
The slots 1, 3, 5 and 7 are suitable for low-profile cards with an adapter. The slots are
counted from the bottom to the top.
A26361-K990-Z120-1-7619, Edition 6
3
System upgrades
55