System upgrades
Low-profile boards
For units with a particularly low overall height, there are so-called low-profile boards with a slot cover
with a lower overall height to match the low-profile units. To also install these low-profile boards in
normal board slots, you must mount a corresponding slot adapter beforehand
Two-piece board slot covers are fitted to the slots intended for low-profile boards. The two pieces are
connected together with a screw.
►
Remove the desired board slot cover and undo the screw.
►
Make the required settings for the board.
Do not dispose of the slot cover. If you remove the board again, you must reinstall the slot
!
cover (cooling, fire protection or EMC regulations to be complied with).
Mounting slot adapter
1
2
Removing slot adapter
2
1
58
►
Fit the slot adapter on the slot cover of the
low-profile board (1) and screw it on (2).
Now you can install the low-profile board in a
suitable slot like a normal board (see "Installing a
board").
►
Unscrew the screw (1) and remove the slot
adapter (2).
A26361-K990-Z120-1-7619, Edition 6