Maintenance; General Recommendations; After Each Use - Craftsman 536.887996 Operator's Manual

SERVICERECORDS
Fill in dates as you Before Every Every Every
completeregular Each 5 10 25 Each Before SERVICE
service. Use Often Hours Hours Hours Season Storage DATES
Chain Lubrication _/
i i = = =
Check Engine Oil Level _/ • • _/ • -_/ -
Change Engine Oil _/ _/
Check Spark Plug - I I I I
Remove Fuel _/
. i i I I I
Adjust Drive Belt _/ _/
* Adjust after 2 to 4 hours of use.
GENERAL RECOMMENDATIONS
The warranty on this snow thrower
does not cover items that have been
subjected to operator abuse or negli-
gence. To receive full value from the
warranty, the operator must maintain
the snow thrower as instructed in this
manual.
Some adjustments will need to be
made periodically to properly maintain
your snow thrower.
AFTER EACH USE
• Run the machine to clear the auger
of snow.
• To prevent freezing of the auger or
controls, remove all snow and slush
from the snow thrower.
• Check for any loose or damaged
parts.
• Tighten any loose fasteners.
• Check and maintain the auger.
• Check controls to make sure they
are functioning properly.
• If any parts are worn or damaged,
replace immediately.
F-041084L 1 6