5045-001
Diagnostics Mode Tests
Button Test
To test the operator panel buttons:
1. Enter Diagnostics mode.
2. Select [HARDWARE TESTS].
3. Select [Button Test].
4. Press each button. [Closed] is displayed until the button is
released. Then [Open] is displayed.
5. Press Return to return to the Diagnostics mode main menu.
Compressor
This Test allows one time or continuous testing of the Compressor/
Decompress portion of the video controller board.
To test the compressor:
1. Enter Diagnostics mode.
2. Select Compressor Test.
3. Select Single or Continuous.
4. Press Return to return to the Diagnostics mode main menu.
Diagnostic Aids 3-4