Removing The Palm Rest - Dell Vostro 1400 Service Manual

Back to Contents Page
Palm Rest
Dell™ Inspiron™ 1420/Dell Vostro™ 1400
Service Manual
Removing the Palm Rest
Replacing the Palm Rest
Removing the Palm Rest
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as the back panel on the computer.
1. Follow the instructions in Before You
2. Remove the optical drive (see
3. Remove the keyboard cover (see
4. Remove the keyboard (see
5. Remove the display assembly (see
6. Turn the computer over and remove all the screws (22) from the bottom of the computer including the three screws from the battery bay.
1 bottom of the system
7. Turn the computer over and remove the three M2.5 x 5mm screws from locations marked P on top of the palmrest.
Begin.
Removing the Optical Drive).
Removing the Keyboard Cover).
Removing the Keyboard).
Removing the Display Assembly).
2 screw (22)