Dell Vostro 1400 Service Manual page 19

2. Follow the instructions in Removing the Display
3. Replace the six M2 x 3-mm screws (three on each side) to secure the display bracket to the display panel.
4. Connect the camera module cable from the connector.
5. Connect the top flex-cable connector to the display locking connector on the new display panel.
6. Connect the bottom flex-cable connector to the inverter connector.
NOTICE: To avoid damaging the display cover and/or the display panel, ensure that the guide posts at the top of the display panel are properly
aligned with the corresponding notches on the display cover.
7. Gently place the display panel inside the display cover.
8. Replace the two screws securing the display panel to the display (top) cover.
9. Replace the display bezel (see
10. Replace display assembly (see
11. Replace the left and right hinge covers by pressing them in place.
12. Replace the keyboard (see
13. Replace the keyboard cover (see
Back to Contents Page
Panel.
Replacing the Display Bezel).
Replacing the Display Assembly).
Replacing the Keyboard).
Replacing the Keyboard Cover).