44
Instruments
8:56
5
07.04.2004
Picture no: 17024t.tif
Triple information display
Set date and time
Infotainment system off: press Ö and ;
below the display as follows:
Press Ö for approx. 2 seconds:
Day flashes
;: Set day
Ö: Month flashes
;: Set month
Ö: Year flashes
;: Set year
Ö: Hours flash
;: Set hours
Ö: Minutes flash
;: Set minutes
Ö: Clock is started.
Correcting time 3
Some RDS transmitters do not send a
correct time signal. If the incorrect time is
continually displayed, deactivate
,5
°C
automatic time synchronisation 3, see next
column, and set the time manually.
The automatic setting is indicated by } in
the display.
Deactivating/activating automatic time
synchronisation: infotainment system off,
press Ö and ; below the display:
Hold down Ö for approx. 2 sec., clock
display is now in setting mode,
Press Ö twice (until year flashes),
Press Ö and hold down for approx.
3 seconds until } flashes in display 3
and text "RDS TIME" appears (years
flash during this time),
Press ;, display shows:
RDS TIME 0 = Off
Press ;, display shows:
RDS TIME 1 = On
Press Ö three times.