Rear Window Blind 3; Electrically Operated Rear Window Blind 3 - Vauxhall Vectra Operation & Maintenance Instructions Manual

Overload
If the system is overloaded, the power
supply is automatically cut off for a short
time.
Fault
If the sun roof no longer assumes the
desired position automatically, program
sun roof electronics as follows:
1. Switch on ignition.
2. Press the rotary switch until the sun roof
is shut, then keep it pressed for at least a
further 3 seconds.
3. Turn rotary switch to ü and keep it
depressed until the sun roof is open.
d
4. Turn rotary switch to and keep it
depressed until the sun roof is closed.
e
5. Turn rotary switch to and leave there
until the sun roof is fully raised.
d
6. Turn rotary switch to and keep it
depressed until the sun roof is closed.
Picture no: 17639j.tif
Electrically operated
rear window blind
3
Reduces intensity of sunlight shining on to
rear seats. Operation with ignition
switched on.
To raise = Press N
To lower = Press N again
Do not operate blind if there are objects
lying in front of the rear window.
Windows, Sun Roof
Picture no: 17640j.tif
Roller blinds at rear door
windows
3
To reduce sunlight at the rear seats.
Pull the blind upwards using the grip and
engage it at the top in the door frame.
141