Brake Fluid - Vauxhall Vectra Operation & Maintenance Instructions Manual

Hide thumbs Also See for Vectra:
Table of Contents

Advertisement

272
Maintenance, Inspection System
Coolant temperature
If the temperature gauge enters the right-
hand (warning) zone or control indicator W
illuminates, check the coolant level
immediately.
z Coolant level low:
Top up coolant. Pay attention to the
instructions given under "Antifreeze and
corrosion protection" and "Coolant
level". Have the cause of coolant loss
remedied. We recommend that you
consult your Vauxhall Authorised
Repairer.
z Coolant level OK:
Have the cause of increased coolant
temperature remedied. Consult a
workshop. We recommend your
Vauxhall Authorised Repairer.
Picture no: 17786j.tif

Brake fluid

Brake fluid level
9
Warning
Brake fluid is poisonous and corrosive. Do
not allow it to come into contact with
eyes, skin, fabric or painted surfaces.
Direct contact could cause injury and
damage.
The fluid level in the reservoir must be
neither higher than the MAX mark nor
lower than the MIN mark.
The use of certain brake fluids can cause
damage or loss of braking power. We
therefore recommend the use of high-
performance brake fluid that has been
approved by Vauxhall if necessary.
Extreme cleanliness is needed when
topping up, since contamination in the
brake fluid can cause brake system
malfunctions.
After correcting the brake fluid level, have
the cause of brake fluid loss remedied. We
recommend that you consult your Vauxhall
Authorised Repairer.

Advertisement

Table of Contents
loading

Table of Contents