How To Configure Static Routes - NETGEAR WGT624 Reference Manual

108 Mbps Wireless Router WGT624 v4 Reference Manual

How to Configure Static Routes

Static routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
To add or edit a static route:
1. From the wireless router's main menu, under Advanced, click Static Routes.
Figure 5-7
2. Click Add. The following page opens:
Figure 5-8
3. Type a route name for this static route in the Route Name box under the table. (This is for
identification purpose only.)
4. If you want to limit access to the LAN only, select Private. The static route will not be reported
in RIP.
5-14
v1.2, July 2007
Advanced Configuration