Port Connections On The Back - NETGEAR WGT624 Reference Manual

Table 1-1. Status Lights (continued)
On
Blink
3. Wireless
Off
On (Amber)
On (Green)
4. Internet
Blink (Green)
Off
On (Green)
Blink (Green)
5. LAN (Local Area
On (Amber)
Network) Lights
Blink (Amber)
1–4
Off

Port Connections on the Back

2
1
Figure 1-2
The back of the wireless router has the following port connections:
1. Power adapter port
2. Four local Ethernet (LAN) ports for connecting the local computers
3. Internet port for connecting to a cable or ADSL modem
4. Factory default reset button
5. Wireless antenna
Connecting the Router to the Internet
108 Mbps Wireless Router WGT624 v4 Reference Manual
Indicates that the Wireless radio is enabled.
Data is being transferred.
The wireless router radio is off. (See
in Chapter 2.)
The Ethernet cable is connected, but the wireless router has not
received an Internet address.
The wireless router has an Internet address.
Data is being communicated with the Internet.
No link is detected on this port.
The local port is connected to a 100 Mbps device.
Data is being transmitted at 100 Mbps.
The local port has detected a link with a 10 Mbps device.
Data is being transmitted at 10 Mbps.
No link is detected on this port.
3 4
v1.2, July 2007
"Advanced Wireless Settings"
5
1-3