Restricting Wireless Access By Mac Address - NETGEAR WGT624 Reference Manual

Restricting Wireless Access by MAC Address

To restrict access based on MAC addresses:
1. Log in to the WGT624 v4 wireless router at its default LAN address of
its default user name of admin and default password of password, or using whatever LAN
address and password you have set up.
Note: When configuring the wireless router from a wireless computer whose MAC
address is not in the Trusted PC list, if you select Turn Access Control On, you
will lose your wireless connection when you click Apply. You must then
access the wireless router from a wired computer or from a wireless computer
which is on the access control list to make any further changes.
2. Click the Wireless Settings link in the Advanced section of the main menu.
3. From the Wireless Settings page, click Setup Access List. The Wireless Card Access Setup
page opens:
Figure 2-6
4. Select the Turn Access Control On check box.
Wireless Settings and Security
108 Mbps Wireless Router WGT624 v4 Reference Manual
v1.2, July 2007
http://192.168.1.1 with
2-13