How To Configure Static Routes - NETGEAR DG834GSP Reference Manual

Reference Manual for the ADSL Modem Wireless Router DG834GSP
In this example:
• The Destination IP Address and IP Subnet Mask fields specify that this static route applies to
all 134.177.x.x addresses.
• The Modem Router IP Address fields specifies that all traffic for these addresses should be
forwarded to the ISDN router at 10.1.1.100.
• A Metric value of 1 will work since the ISDN router is on the LAN.
This represents the number of routers between your network and the destination. This is a
direct connection so it is set to 1.
• Private is selected only as a precautionary security measure in case RIP is activated.

How to Configure Static Routes

1. Log in to the router at its default LAN address of http://10.1.1.1 with its default User Name of
admin, default password of password, or using whatever User Name, Password and LAN
address you have chosen for the router.
2. From the Main Menu of the browser interface, under Advanced, click Static Routes to view
the Static Routes menu.
3. To add or edit a Static Route:
a. Click the Edit button to open the Edit Menu, shown in
Figure 7-5
b. Type a route name for this static route in the Route Name box under the table.
This is for identification purposes only.
7-12
v1.0, June 2007
Figure 7-5.
Advanced Configuration