Palm m100 Series Handbook page 143

Adjust the following options as needed.
3.
Identifies the port for the modem. If you are unsure of the port
Serial Port
assignment, look at the Modem Properties in the Windows
Control Panel.
Determines the speed at which data is transferred. Try the As
Speed
Fast As Possible rate first, and adjust downward if you
experience problems. This setting allows Palm Desktop
software and your handheld to find and use the fastest speed.
Identifies the modem type or manufacturer. Refer to your
Modem
modem manual or face plate for its type or settings. If you're
not sure of your modem type or your modem doesn't match
any that appear in the list, select Hayes Basic.
Identifies the setup string for your particular modem. Not all
Setup String
modems require a setup string. Refer to your modem manual
and enter the setup string if recommended by the
manufacturer.
Click OK.
4.
To prepare a Mac computer for a modem HotSync operation:
Confirm that the computer modem is connected and turned on, and that no
1.
communications applications, such as fax or telephony software, or AppleTalk
networking are running on that serial port.
Make sure the computer is disconnected from all online services, such
NOTE
as CompuServe and America Online (AOL). This helps to avoid conflicts with
the serial port.
Double-click the HotSync Manager icon in the Palm folder.
2.
Click the Serial Port Settings tab.
3.
Under Check for handheld connection using, click Modem Setup.
4.
Conducting a HotSync operation via a modem
135