Identifies the port that HotSync Manager uses to communicate
Serial Port
with the cradle/cable. The Palm Desktop installation software
automatically detects the port to which you connected the
cradle/cable. If necessary, you can change the port selection.
NOTE
modem or other device.
Determines the speed at which data is transferred between
Speed
your handheld and Palm Desktop software. Try the As Fast As
Possible rate first, and adjust downward if you experience
problems. This setting allows Palm Desktop software and your
handheld to find and use the fastest speed.
Click the Modem tab to display the modem settings and adjust the options as
5.
needed. See
"Conducting a HotSync operation via a modem"
chapter for more information.
Click OK.
6.
To set the HotSync options on a Mac computer:
Double-click the HotSync Manager icon in the Palm folder.
1.
Click the HotSync Controls tab and select any of the following options.
2.
Your handheld cannot share this port with an internal
Selecting HotSync setup options
later in this
125