Attaching The 9-Spool Cotton Stand (Optional) - Brother BES-116 Instruction Manual

Chapter 1 Preparation of Embroidery Machine

3-6 Attaching the 9-spool cotton stand (optional)

q
e
1. Remove the screw and the thread guide w from the thread guide bar q.
2. Remove the screws and arm cover (R) e from the machine head.
3. Insert the thread guide bar q into the hole of cotton stand (L) r, and attach it to the machine
head using the two screws.
4. Place cotton stand (S) t on cotton stand (L) r and tighten the screw.
5. Attach thread guides (A) y and (B) u, and the thread guide joint i to the thread guide bar q,
and secure them using the screw.
6. Attach the guide plate o to the thread guide joint i and cotton stands (S) t and (L) r using
the screws.
7. Attach the vinyl tube !0 to thread guides (A) y and (B) u.
20
w
o
u
y
t
BES-116AC
!0
i
q
r