Brother BES-116 Instruction Manual page 49

2. Press .
3. Select a screen for data registration by pressing
Currently selected embroidery data
4. Select an area for registration, using ten keys or
.
A space available is automatically selected.
Pressing automatically locates the first space in the memory.
5. Data in the floppy disk is displayed. Press
Pressing displays a pattern name.
6. Select data to register by pressing ten keys or
Data is newly registered in the machine memory.
Select embroidery data and press
memory and the machine enters a standby status.
If registration is done without loading a floppy disk, the following screen is displayed after the
step 4 is finished.
Load a floppy disk for data registration.
Chapter 3 Selection of Data and Embroidering
Number of stitches in selected embroidery data
When there is no data
Icon indicating a kind of selected data
Name of a selected embroidery pattern
(It may be the same as a file name.)
. The selected data is automatically registered in the
BES-116AC
.
Currently displayed screen
No. of screens to be selected
Data in machine memory
, then press
to select a screen.
Currently displayed screen
No. of screens to be selected
Data in floppy disk
then press .
47