Power Saving LED Connector: JGL1
JGL1 is connected to a power saving LED. There are two types of
LED that you can use: 3-pin or 2-pin (ACPI request) LED. If connected to
a dual color LED, the LED light is green when system in turned on, and
turns to orange color while entering the sleep state. For single color LED,
the LED is lit when system is on, and blinks during the sleep state.
3-Pin LED
Green Color
Orange Color
1
3
Green: Full-On Mode
Orange: Sleep Mode
2-Pin LED
Green Color
Orange Color
1
3
Dual Color
2-21
Hardware Setup
PLED1
1
Suspend LED
GND
JGL1