Connecting A Standard-Definition Tv (Sdtv); Figure 7 - Connecting The Dcx To A Stereo Tv (Sdtv) - Motorola DCX3501-M Installation Manual

Installation

Connecting a Standard-Definition TV (SDTV)

1. Connect the stereo audio cable to the
series set-top and the
2. Connect a video cable to the
input video
and the
DCX set-top and the TV.
Note: These video connection methods do not support HD video. If you have an HDTV,
see Connecting HDTV — Separate Video/Audio
Figure 7 – Connecting the DCX to a stereo TV (SDTV)
Note: S-Video and Composite video require separate audio connections.
Note: Only (1) video connection and (1) audio connection is required.
Note: Solid lines indicate optimum connections.
Note: If the TV does not support S-Video connections, composite video connections may
be used in place of S-Video.
Note: If the TV does not support S-Video or composite connections, use the RF out
connector on the DCX set-top. The RF connection carries video and audio.
High-Definition DVR DCX3501-M • Installation Manual
365-095-16528-x.2
audio l
audio left audio right
and
video out
connector on the DCX3501-M series set-top
on the TV or an S-video cable to the
Connections.
r
and connectors on the DCX3501-M
connectors on the SDTV.
s-video
connectors on the
B
21