Motorola DCX3501-M Installation Manual page 71

Diagnostics
Field Description
CARD Interface CableCARD Interface is a status indication of the interface between the Host and
CableCARD. It will indicate "Good" if no errors are detected, "Error" if there is an
error establishing the CableCARD interface, or "Unsupported CARD" if the inserted
CableCARD is not an M-CARD.
CableCARD ID The unique identifier provided by the CableCARD.
Host ID The unique identifier in the Host Device Certificate.
Data ID A value generated by the CableCARD for the Pairing report.
Validation UKNOWN if a Validation message was not received by the product.
•
VALID or INVALID as set by the Host Validation Message received from the
•
headend.
BINDING if the CableCARD is busy with the binding authentication process.
•
NOT BOUND if Card validation status is not bound for CableCARD reasons.
•
HOST CERTIFICATE INVALID if the status is not bound because the Host Certificate
•
was invalid.
HOST SIGN FAILED if status is not bound because of failure to verify Host's SIGN.
•
AUTH KEY FAILED if status is not bound because of failure to match AuthKey from
•
the Host Device.
• FAILED if binding failed for other reasons.
Pairing Rpt Set to MMI or Reportback as received by a message from the headend, or set to
Method Unknown if the headend message was not received.
MSO Phone MSO Phone Number as configured at the headend.
Number
CableCARD
Object Name Code object name executing on the CableCARD.
Object Ver. Code object version executing on the CableCARD.
Manufacturer CableCARD manufacturer.
HW Version Version number provided by the CableCARD.
Boot Version Version number provided by the CableCARD.
2nd Version Version number provided by the CableCARD.
Serial Number Serial number fo the CableCARD
MAC Address MAC Address of the CableCARD.
High-Definition DVR DCX3501-M • Installation Manual
365-095-16528-x.2
B
61