Lexmark MX6500e 6500e User Manual page 56

5.2.1.2 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Standard
Finisher
The optional finisher supports Corner staple, Dual staple (IPDS Edge stitch), and Double Dual staple
(IPDS Edge with four staples). The printer automatically rotates the text 180 degrees for short-edge fed
paper. If necessary, reformat your job on the host with a different text orientation to avoid stapled sets
that are hard to read.
Refer to your printer or finisher documentation to determine the finishing support and staple location for
various paper sizes. Finishing functions may not be applied to all paper sizes.
See Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher
Functions (on page 59). For information of additional functions supported.
The Printer device type must always be *IPDS.
How to specify Printer File parameters is shown below.
5.2.1.2.1 Corner Staple
Parameters in the printer file
Corner Staple.......*TOPLEFT, *BOTLEFT, *TOPRIGHT, *DEVD,
Drawing of staple placement
*TOPLEFT
*DEVD
Text
Text text text text
text
text.
*BOTLEFT
*TOPRIGHT
*TOPLEFT
*DEVD
56
Text shown with 0
degree rotation
specified in IPDS job
Long-edge fed paper,
leading edge
Text shown with 0
degree rotation
specified in IPDS job
Short-edge fed paper,
leading edge