Table of Contents
Advertisement
T
ROUBLESHOOTING
Problem
System message
shows "No Signal"
Low or unstable
signal
Audio feedback
Possible Causes
No power supply to
camera
Camera is not paired
with receiver
Service out of range
Signal is blocked
Antenna direction is
limited
Signal has been
blocked
Strong radio signal
nearby
Strong
electromagnetic
interference nearby
Camera and receiver
are too close
Remedies
Check power adapter and power cable
connection. If camera is running on battery
alone, you may need to replace batteries.
See pairing operation for detail
Move the camera closer to the receiver.
If possible, remove major obstacles in
between the camera and the receiver. Or,
relocate the camera to another location.
Adjust the camera antenna and receiver
position.
If possible, remove major obstacles in
between the camera and receiver. Or,
relocate the camera to another location.
Keep WIFI router away from the camera
and/or receiver.
Keep active appliances such as hair dryers,
heat fans, air conditioners, water pumps, or
microwave ovens away from the camera
and/or receiver.
The camera has a high sensitivity
microphone. Keep the camera at least 10
feet away from the receiver. If the camera
must be within 10 feet of the receiver, keep
the volume down.
9
.
Advertisement
Table of Contents
