The ATX Switch Chassis View
Manual — Enable
Manual — Disable
Setting the Spanning Tree Explorer Mode
•
•
•
Token Ring Translation
The Translation window will allow you to configure bridging-translation between
Token Ring and other topologies for various protocols. The Translation window
will be available on Token Ring ports only.
To access the TR Translation window:
1. From the Bridge Configuration window, click on the Translation button to
2-20
the Spanning Tree Protocol and has it enabled on this
port.
The port will always accept and propagate STE packets,
regardless of its port state.
The port will not accept or send STE packets; any STE
packets received will be discarded.
To choose Auto as the Spanning Tree Explorer Mode on this port, click in the
Auto selection box.
To choose Manual Enable as the Spanning Tree Explorer Mode on this port,
click in both the Manual selection box and the Enable selection box.
To choose Manual Disable as the Spanning Tree Explorer Mode on this port,
click in both the Manual selection box and the Disable selection box.
display
Figure
2-12, the TR Translation window.
Figure 2-12. TR Translation window
Managing the Hub