Using Window Buttons - Enterasys ATX User Manual

Introduction
Device Name
Displays the user-defined name of the device. The device name can be changed
via the System Group window; see the Generic SNMP User's Guide for details.
IP Address
Displays the ATX Switch's IP (Internet Protocol) Address; this will be the IP
address used to define the ATX Switch icon. IP addresses are assigned via Local
Management for the ATX Switch; they cannot be changed via NetSight Element
Manager.
Location
Displays the user-defined location of the device. The location is entered through
the System Group window; see the Generic SNMP User's Guide for details.
MAC Address
Displays the manufacturer-set MAC address of the channel through which
NetSight Element Manager is communicating with the ATX Switch. This address
is factory-set and cannot be altered.
Informational fields describing the boards and/or ports being modeled are also
displayed in most windows:
Port Number
Displays the number of the monitored port.
Uptime
Displays the amount of time, in a day(s) hh:mm:ss format, that the ATX Switch
has been running since the last start-up.

Using Window Buttons

The
exit a window and terminate any unsaved changes you have made. You may also
have to use this button to close a window after you have made any necessary
changes and set them by clicking on an
An
configurable values; it allows you to confirm and SET changes you have made to
those values. In some windows, you may have to use this button to confirm each
individual set; in other windows, you can set several values at once and confirm
the sets with one click on the button.
The
current window. For more information concerning Help buttons, see Getting
Help,
1-4
Figure 1-1. Sample Window Showing Group Boxes
button that appears at the bottom of most windows allows you to
, , or
button brings up a Help text box with information specific to the
page 1-5.
,
button appears in windows that have
, or button.
Software Conventions