Seat; Hydrostatic Ground Drive System; Tires & Wheels; Cutting Deck - Exmark Lazer Z XP Operator's Manual

2.6.3 Parking Brake Lever: Engages parking brake.
2.6.4 Deck Height Adjustment Lever: Sets cutting height to desired position.
2.6.5 Deck Lift Assist Lever: Foot pedal that assists in raising the deck.

2.7 SEAT

2.7.1 Type: Deluxe suspension seat with high back, low profile foam-in-place cushion
(dampened, adjustable spring suspension) and armrests.
2.7.2 Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other
components. Held in tilted position with prop rod. Adjustable fore and aft seat track.
2.7.3 Armrests: Molded adjustable flip-up armrests.
2.7.4 Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay
seat switch eliminates rough ground cut-outs.

2.8 HYDROSTATIC GROUND DRIVE SYSTEM

2.8.1 Hydrostatic Pumps: Two Hydro Gear BDP-21L variable displacement piston pumps.
2.8.2 Wheel Motors: Two Parker/Ross with 1 1/4" tapered shafts.
2.8.3 Hydraulic Oil Type: Synthetic Mobil 1 15W-50.
2.8.4 Hydraulic Oil Capacity: 4 qt. (3.8 L.)
2.8.5 Hydraulic Filter: Replaceable cartridge type.
2.8.6 Speeds: 0 - 12.0 mph (19.3 km/hr) forward.
2.8.7 Drive wheel release valves allow machine to be moved when engine is not running.
2.9 TIRES AND WHEELS
2.9.1 Tires
Quantity
Tread
Size
Ply Rating
Pressure

2.10 CUTTING DECK

2.10.1 Cutting Width:
2.10.2 Discharge: Side
2.10.3 Blade Size: (3 each) w/60" Deck 20.5 in. (52.1 cm)
2.10.4 Blade Spindles: Solid steel spindles with 1" I.D. bearings.
2.10.5 Deck Drive: Electric clutch mounted on horizontal engine shaft. 2 – "A" Section
belts (with self-tensioning idlers) from electric clutch to transfer shaft mounted on
deck.
Blades are driven by one "B" Section belt (w/self-tensioning idler) from transfer
shaft on deck to blade spindles.
2.10.6 Deck: Full floating deck is attached to out-front support frame. Six anti-scalp
rollers provide maximum turf protection. Deck design allows for bagging, mulching
or side discharge.
2.10.7 Deck Depth: 5.5" (14.0 cm)
P/N 103-2146: 25 microns, No bypass
0 – 8.0 mph (12.9 km/hr) reverse.
Drive
Pneumatic (Air-Filled)
2
Multi-Trac C/S
26 x 12.0-12
4
10 psi (69 kPa)
72 in. (182.9 cm)
60 in. (152.4 cm)
w/72" Deck 24.5 in. (62.2 cm)
- 12 -
Front Caster
Semi-Pneumatic
2
Smooth
13 x 6.50-6