Enterasys X-Pedition XSR-3020 Getting Started Manual page 80

Bootrom Monitor Mode Commands
XSR-3020:bp
Enter current password:
Enter new password: ******
Re-enter new password: ******
Password has changed.
bu
This command updates the bootrom from a local file. You are prompted to enter data by the
following script. When the "
enter
adversely. After you have updated this file, you can delete it from Flash to conserve space for
other files.
XSR-3020: bu btXSR3000_1_2.fls
Verifying btXSR3000_1_2.fls file ...
bootFirst size=28992 sum=0xc2e5 compressed_size=28992 entry=0x80020000
bootrom size=842656 sum=0xfa65 compressed_size=347728 entry=0x81e00000
OK
Proceed with erasing current Bootrom in flash and replace with btXSR3000_1_2.fls?
(y/n) y
First copy of Bootrom ...
Erasing 3 sectors at address=0xbfc20000
Programming 131072(0x20000) bytes at address 0xbfc20000
Programming 131072(0x20000) bytes at address 0xbfc40000
Programming 85600(0x14e60) bytes at address 0xbfc60000
Verifying Bootrom flash sectors
Locking 3 Bootrom flash sectors
Second copy of Bootrom ...
Erasing 3 sectors at address=0xbfca0000
Programming 131072(0x20000) bytes at address 0xbfca0000
Programming 131072(0x20000) bytes at address 0xbfcc0000
Programming 85600(0x14e60) bytes at address 0xbfce0000
Verifying Bootrom flash sectors
Locking 3 Bootrom flash sectors
*****
bU
This command updates the bootrom through a network transfer to a local file. Be sure to enter the
U
in uppercase. After you have updated this file, you can delete it from Flash to conserve space for
other files.
cd
This command changes the current directory in the file system to
3-36 Software Configuration
y . Be sure not to interrupt the process or power down the XSR or it may be affected
Bootrom update completed.
Proceed with erasing Bootrom in flash
*****
..." statement appears,
flash: cflash:
or .