Enterasys X-Pedition XSR-3020 Getting Started Manual page 35

4. Remove the NIM slot cover, as shown in
the side before taking it out.
5. Gently attach the NIM card(s) to the connector on the motherboard and secure with four
screws, as shown in
6. Re-install the chassis cover.
Figure
Figure 2-2 Removing NIM Slot Cover
Figure 2-3.
Figure 2-3 Attaching NIM card to Motherboard
Installing NIM Cards and Rack Mounting
2-2, by grasping the handle and pulling it to
XSR Getting Started Guide 2-3