Atm Port Redundancy Configuration Screen - Enterasys VHSIM2-A6DP User Manual

• Reset all configurations in the ATM Port Redundancy Configuration screen to their factory
default settings.
NOTE: There MUST be two APIMs installed in the VHSIM2-A6DP to make the
redundancy feature available.
To access the ATM Port Redundancy Configuration screen from the ATM screen, perform the
following steps:
1. Use the arrow keys to highlight the ATM PORT REDUNDANCY menu item from the
Physical Port Configuration Menu screen.
2. Press ENTER. The ATM Port Redundancy Configuration screen,
NOTE: The ATM Port Redundancy Configuration screen refreshes approximately every
3 seconds.
Figure 3-12 ATM Port Redundancy Configuration Screen
The following list explains each ATM Port Redundancy Configuration screen field:
Redundancy Status (Toggle)
Used to enable or disable the APIM redundancy feature of the VHSIM2-A6DP. This field toggles
between Enabled and Disabled. The default value of this field is Enabled.

ATM Port Redundancy Configuration Screen

Figure
Local Management
3-12, displays.
3-31