Gps Speed Search - EverFocus EMV1200 User Manual

3.4.3 GPS Speed Search

Click button to enter GPS search menu.
Figure 3-6 Search Menu – GPS Search
From: Select starting date and time
To: Select ending date and time.
Display Unit: If the speed is being recorded from the GPS receiver, the desired speed display units must
be selected. Select GPS speed unit from KPH and MPH. Selecting MPH converts the GPS signal to display
speed in miles per hour.
Select search format from Less Than, More Than, Inside Range and Outside Range.
Speed Limit: Set the GPS speed limit to be searched. If search format is a range, then set the values for
both ends of range.
Click button to start search action.
Click button to enter GPS bordering search menu.
31