Exposure; Lens; Shutter; Iris - EverFocus EQH5200 Operation Instructions Manual

2 megapixel full hd-cctv camera

Hide thumbs Also See for EQH5200:

Table of Contents

Press Set button to enter SETUP Menu. In SETUP menu, use the joystick to make settings. User

can do camera settings including Exposure, White balance, Day/Night, Special and Image adjust.

Please select the item by moving the joystick UP or DOWN then press SET to enter the settings.

Move the joystick to the last option which is "Return" to return to live view.

4.1 Exposure

In this section, user can do camera settings including Lens, Shutter, Iris, AGC, BLC and Anti-flicker.

Please select the item by moving the joystick UP or DOWN. Select "Return" to return to the previous

menu.

Select the type of the lens used (Manual/DC type) by moving the joystick LEFT or RIGHT.

NOTE:

The brightness of the screen can be adjusted in DC mode in Lens Level. The level can be adjusted

from 1 to 31.

Select the shutter mode by moving the joystick LEFT or RIGHT.

Select from Auto,1/50,1/60,1/100,1/120,1/250,1/500,1/700,1/1000,1/1600,1/2500,1/5000 and 1/8000.

NOTE:

When selecting a DC lens, the shutter speed is fixed as 1/60 for NTSC and 1/50 for PAL.

Select the iris mode by moving the joystick LEFT or RIGHT.

The level can be adjusted from 0.0EV, +0.5EV, +1.0EV, +1.5EV, +2.0EV, -0.5EV, -1.0EV, -1.5EV and

-2.0EV.

4.1.4 AGC (Auto Gain Control – basic low light signal amplification)

Select the level you would like to choose by moving the joystick LEFT or RIGHT. The more the level of

gain increases, the brighter the screen, but the level of noise increases as well. Please select from High,

Middle, Low and Off.

Select "On" or "Off" by moving the joystick LEFT or RIGHT. Video gain can be adjusted automatically to

correct the exposure of subjects that are in front of a bright light source.

- 10 -

Table of Contents