Enterasys RoamAbout RBT-4102 Installation Manual page 51

• Default Gateway is the IP address of the router for the access point, which
is used if the requested destination address is not on the local subnet.
If you have management stations, DNS, RADIUS, or other network servers
located on another subnet, type the IP address of the default gateway
router in the text field provided. Otherwise, leave the address as all zeros
(0.0.0.0).
d. Click Apply at the bottom of the page.
A Settings Saved message appears on the screen.
e. Click OK.
f. Click Administration from the menu on the left-hand side of the page.
The Administration page appears.
g. Click the Reset button next to Reset Access Point, located at the bottom of
the page.
The access point prompts you to confirm that you want to reboot the
system.
h. Click OK.
The access point reboots.
i. Type the IP address that you specified for the access point in your
browser's address field. For example, enter http://10.2.101.22/.
The Login window appears.
j. Enter the username admin and the password password, and click LOGIN.
The Identification page appears.
k. Click Administration from the menu on the left of the page.
The Administration page appears.
l. Go to step 6.
Using Web Management
3-11