Table of Contents
Advertisement
HD Full:
Buzzer: Check box to enable the buzzer when hard drive is full (recommended if the Record Overwrite
function is disabled, see Section 4.3).
Email Notify: Check box to enable email notification when HD is full. Email operation requires that valid
email settings have been entered in the Network Setting/Email setup screen.
Network Alarm: Check box to send out a network alarm to client PC. (requires PowerCon software and
setting up Alarm Server in Network Setup menu)
Alarm Output: This will transmit a signal through the alarm output. It can be set to either "NONE" (not
active), "1"(active) or "2"(active).
Output Type: Output action when alarm is triggered.
Timeout: Alarm output lasts for the set time duration.
Permanent: Alarm will be continuously active until user presses the "Enter" key or resets the alarm
remotely.
Transparent: Alarm output remains active until event ends.
Trans+Timeout: Alarm output continues until event ends, then continues for the set time duration.
Timeout Duration: The amount of time the alarm condition continues when the HD is full. Duration
selectable from 1 to 150 seconds.
Click
button to return to the previous level of menu.
Figure 4-14 Alarm – Event - HD Full
45
Advertisement
Table of Contents
