Specifications - EverFocus EMV400 User Manual

1.3 SPECIFICATIONS

Video Format
Operating System
Video Input
Video Output
Video Compression
Recording Resolutions
Audio Inputs
Audio Outputs
Alarm Inputs
Alarm Outputs
Storage
Recording Rate
Recording Mode
Record Quality
Pre Alarm Recording
Playback Rate
Playback Search
Video Loss Detection
Event Alarm
EMV400 - 4CH Mobile DVR
NTSC/PAL (auto detected by system)
Embedded Linux with special small monitor friendly GUI
4 channels (vibration resistant locking Molex connectors – Interface
cables to BNC-F supplied: two groups of 2 cameras each)
Main monitor: 1 composite BNC rear panel / 1 front panel RCA
output
H.264
NTSC: 720x480/720x240/360x240
PAL: 720x576/720x288/360x288
4 line in (vibration resistant locking Molex connectors - Interface
cables to RCA-F supplied: two groups of 2 cameras each)
1 front panel RCA line out
6 alarm inputs (vibration resistant locking Molex connectors -
Interface cables supplied)
2 alarm outputs (form "C"; contacts rated at 30V AC/DC @ 1 amp –
interface cables supplied)
2.5" HDD x 1(up to 1TB)
NTSC: D1 60FPS, 2CIF 120f FPS, CIF 240 FPS
PAL: D1 50 FPS, 2CIF 100 FPS, CIF 200 FPS
Per camera resolutions and record rates can be set individually per
camera through the OSD menus up to the maximum record
capacity of 240 NTSC (200 PAL) CIF equivalent FPS
Continuous recording, event recording, continuous + event
recording
(Rate and resolution in each mode set independently per camera)
Adjustable in five levels per camera per Record Mode
Optional; 5 second interval
NTSC: D1 60 FPS, 2CIF 120 FPS, CIF 240 FPS
PAL: D1 50 FPS, 2CIF 100 FPS, CIF 200 FPS
Time/date, event search
Yes
Fan failure, hard disk temperature, hard disk failure, hard disk full,
hard disk removed, power loss (after power is restored), network
loss, GPS loss, GPS speed, GPS fencing, G sensor limits
3