Ericsson RX8200 User Manual page 18

Front Panel Control
4.3.2 LCD
A 2-line x 40-character back-lit dot-matrix Liquid Crystal Display (LCD) displays
various menus and settings. The menus and setting available will vary depending on
which options have been enabled through the purchase of a suitable license.
4.3.3 Arrow Pushbuttons
Four arrow pushbuttons (or keys) are used to navigate through the front panel LCD
menus.
Each arrow pushbutton is backlit by an integral LED when active, indicating that a
further choice or action is available by pressing that pushbutton.
4.3.4 Edit and Save Pushbuttons
The Edit and Save pushbuttons are used to modify and store user settings within
the selected menu.
The Edit pushbutton is backlit by an integral LED when the current menu contains
an editable setting.
To edit a user setting within the selected menu:
1. Press the Edit pushbutton and then use the
2. Change the value of the setting using the
During this edit operation, both the Edit and Save pushbuttons will be lit.
The Save pushbutton is backlit by an integral LED when changes have been made
to a setting that require saving.
When a user setting has been modified:
1. Press the Save pushbutton to confirm and action this new setting.
2. To ignore any changes that have been made and to return to the original setting,
18 (44)
= Up
= Down
= Left (Back)
= Right (Forward)
pushbuttons to move the cursor within that menu (if necessary).
press the Edit pushbutton.
(Back) and (Forward)
(Up) and (Down) pushbuttons.
EN/LZT 790 0009 R1A 2011-03-30